home *** CD-ROM | disk | FTP | other *** search
- Path: jupiter.sun.csd.unb.ca!v4jk
- From: v4jk@jupiter.sun.csd.unb.ca (Trevor Rankin)
- Newsgroups: demon.tech.amiga,de.comp.sys.amiga.tech,comp.sys.amiga.misc,comp.sys.amiga.hardware
- Subject: Re: SVGA Monitor connection to an Amiga???
- Date: 22 Feb 1996 19:10:14 GMT
- Organization: University of New Brunswick, Fredericton, NB, Canada
- Message-ID: <4gif2m$t3k@sol.sun.csd.unb.ca>
- References: <1468.6621T1285T2972@fuchal.demon.co.uk> <70309336@defocus.demon.co.uk> <Pine.LNX.3.91.960222172837.4837B-100000@mail.inhb.co.nz>
- NNTP-Posting-Host: jupiter-alt3.unb.ca
-
- In article <Pine.LNX.3.91.960222172837.4837B-100000@mail.inhb.co.nz> Ross Deeley <rossdee@inhb.co.nz> writes:
-
- >> When I added my CV64 and attempted to use the adaptor that was supplied
- >> with my Microvitec, the Amiga would refuse to boot, black screen,
- >> the hard drive spinning up and down in 1 second bursts.
- >>
- >> Obviously, this gave me cause for concern, but changing the adaptor
- >> to a standard CBM made one cured it.
- >
- >I have a similar wierd experience with my A1200 - I got a technician to
- >make me a switch box so my 1940 can be connected to both my 1200 and my
- >B2000 (with flicker fixer) at the same time. It works OK, but will not
- >boot if the switchbox is set to the B2000 when the 1200 is booted (like
- >you I get a black screen...
-
- I got a non-CBM adaptor and am having the same problems with my A1200 - I
- can't boot with my VGA monitor (Acer) connected. The monitor works when
- I boot with my 1084 and then switch to a 31k mode and then plug in the
- VGA but when I boot with the VGA connected, I just get a black screen
- after the HD spins for long time. Anybody know what the problem is
- here?
-
-